District heating companies in Denmark are obligated to achieve annual heat savings in their customer base. A commercial building converting from gas or oil to heat pump qualifies for distributor subsidy through the heat savings pool — run through the heat supplier, not through government.
The Varmesparerpulje is Denmark's heat savings obligation scheme. Under the same regulatory framework as the Energisparepulje, district heating companies (fjernvarmeselskaber) and gas distributors operating in Denmark carry annual heat-saving obligations. They fulfil these obligations by subsidising heat-efficiency improvements at customer premises — including commercial buildings.
Like the Energisparepulje for electricity, the subsidy is paid by the obligated heat distributor directly — not through a government portal. Contact your district heating supplier or gas distributor to access funding.
Source:
Commercial buildings connected to a district heating network or gas distribution network and implementing qualifying heat-saving measures.
Qualifying measures: insulation (roof, wall, floor), window and door replacement, heat pump installation (replacing direct electric or fossil-fuel heating), heat recovery systems, upgrade of district heating substations, building controls reducing heat consumption. LED lighting and BESS do not qualify under the heat savings obligation.
New buildings and major renovations are typically excluded — the obligation scheme targets existing building stock where documented savings above baseline can be demonstrated.
1. Contact your district heating supplier (fjernvarmeselskab) or gas distributor and describe the planned project.
2. Obtain the distributor's assessment of whether the project qualifies and the indicative subsidy rate per MWh of documented annual heat saving.
3. Agree terms before starting work — subsidies are not applied retrospectively to completed projects.
4. After completion and measurement, the distributor pays the agreed subsidy against documented savings.
Rates vary by distributor and time of year — distributors that have already met most of their annual obligation may offer lower rates or decline new projects in Q4. Begin discussions early in the calendar year.
Denmark has one of the highest district heating penetration rates in Europe. Approximately 64% of Danish buildings are connected to district heating networks. For a commercial building already on the district heating network, heat savings subsidies are often the most accessible first-layer funding for fabric and heating efficiency improvements — before Erhvervspuljen grants and the EED audit mandate are engaged.
A building converting from individual gas boilers to a district heating connection qualifies for heat savings funding through the gas distributor. A building already on district heating upgrading its substation or adding a heat pump for peak load management qualifies through the district heating supplier.
Erhvervspuljen and the Varmesparerpulje address similar project types but through different channels. Disclosure of subsidy received through the heat savings scheme is required in an Erhvervspuljen application. Confirm stacking eligibility with Energistyrelsen before submission.
→ Danish incentives overview · Energisparepulje · Erhvervspuljen · Danish regulation