EPC Practitioners

What EPC practitioners need to know across Europe

Multiple methodologies across European markets. The treatment of on-site generation differs in every one — and the difference is material to the advice practitioners give.

United Kingdom

UK non-domestic EPCs are calculated using SBEM (Simplified Building Energy Model), currently at iSBEM v6.1.e. A 2025/2026 England update to SBEM does not exist — this has been confirmed with the National Calculation Methodology (NCM). Practitioners citing an imminent SBEM methodology change for England are working from incorrect information.

The non-obvious fact for UK practitioners: wind turbines are explicitly included as a creditable on-site generation technology in the SBEM methodology — confirmed in the Springer Nature Journal of Building Appraisal (DOI: 10.1057/jba.2010.17). BESS does not currently receive direct credit under SBEM. The H2 2026 DESNZ methodology update is expected to address on-site storage — it is pending, not in force. Practitioners should state this distinction clearly when advising clients on investment sequencing.

RdSAP 10 applies to domestic buildings only. For non-domestic assessments, SBEM is the methodology regardless of building size.

→ UK practitioner pathway → · UK country overview →

Sweden

Swedish energideklarationer for non-domestic buildings use the BEN calculation methodology. The electricity weighting factor is 1.8 — meaning on-site generation has a proportionally larger effect on the primary energy figure than the raw kWh output suggests. On-site wind generation is credited, but only for the fraction consumed on-site; exported surplus receives no credit.

The non-obvious fact for Swedish practitioners: BESS directly improves the Swedish energideklaration in a way that UK BESS does not improve the UK EPC. Battery storage increases the on-site consumption fraction of generated electricity, which increases the credited generation in the primary energy calculation. A Swedish assessor advising a client on a wind installation without also modelling the storage benefit is missing a significant and demonstrable rating improvement. This is a technical interaction specific to the BEN methodology — it does not apply in the UK under current SBEM rules.

The A0 class, introduced from 25 May 2026 (SFS 2026:744), is the new top tier — below 30 kWh/m²/year primary energy. Few existing commercial buildings achieve it without significant generation and storage investment.

→ Swedish practitioner pathway → · Sweden country overview →

Ireland

Irish non-domestic energy performance is assessed using NEAP/iSBEMie, currently at v5.7b (released 8 July 2026). The tool is maintained by SEAI. The electricity primary energy factor is 1.75 (updated from 1.0 in iSBEMie v5.6a, July 2023 — a substantial upward revision that materially changes the primary energy figure for electrically-heated buildings).

The non-obvious fact for Irish practitioners: the simplified BER scale introduced on 24 May 2026 (S.I. No. 168/2026) affects how practitioners communicate ratings to clients, not how they are calculated. The A1/A2/A3 sub-classifications are replaced by a single A band; A0 (zero-emission building, primary energy below 42 kWh/m²/year) is the new upper tier. Existing certificates issued under the old scale are valid — they do not need to be reissued. Practitioners should be clear that the scale change is presentational: A1 under the old scale is not the same as A under the new scale.

→ Irish practitioner pathway → · Ireland country overview →

Denmark

Danish energimærke assessments use the Be18 tool. The combined on-site generation credit — wind and solar together — is capped at 25 kWh/m²/year reduction in primary energy need. This is a statutory ceiling confirmed in the CA-EPBD Denmark 2020 primary report (page 3). No other country covered on this site has an equivalent cap.

The non-obvious fact for Danish practitioners: this cap changes the advice a practitioner should give about system sizing. A client investing in a wind turbine to improve their energimærke will receive no additional rating benefit from a system that delivers more than the equivalent of 25 kWh/m²/year in primary energy terms. The operational and revenue case for a larger system may still be valid — but the certification argument is exhausted at the cap. Practitioners who do not state this clearly are exposing themselves to a client complaint when the energimærke improvement falls short of expectations.

→ Danish practitioner pathway → · Denmark country overview →

Norway

Norwegian energy performance certificates (energiattest) use a dual scale: energy use in kWh/m²/year and heating source (A to G). The NS 3031:2025 calculation standard applies from 1 January 2026 (NVE veileder March 2026). On-site generation is credited without a cap — the full output of an on-site wind installation is credited in the calculation.

The non-obvious fact for Norwegian practitioners: EPBD 2024 has not been incorporated into the EEA Agreement, and no EU MEPS deadlines apply to Norwegian buildings. Norwegian practitioners advising clients who hold or are acquiring properties across both EU and EEA/Norwegian portfolios must be precise about which obligations apply to which buildings. EU-derived mandatory renovation obligations, Green Asset Ratio disclosure requirements, and EPBD 2024 performance standards do not automatically bind Norwegian properties — even if the client's institutional lender is EU-regulated.

→ Norwegian practitioner pathway → · Norway country overview →

Where next

Select your country for the full practitioner pathway

Methodology detail, generation credit treatment, and compliance advisory guidance — country-specific throughout.

Select your country above