Regulatory Reference — Sweden

Swedish EPC Methodology

Swedish energideklarationer for existing buildings are based on measured actual energy use — not a modelled estimate. On-site generation from wind turbines is captured directly through this measurement path.

The calculation framework

Sweden does not use SBEM. The energideklaration for a building records a primärenergital (primary energy number, EPpet) in kWh/m²/year — calculated under:

For existing buildings, actual measured energy use over a 12-month period is the standard basis. Calculation from design data is permitted only where measurement data are unavailable.

BEN primary text (PDF): rinfo.boverket.se/BFS2016-12/pdf/BFS2016-12.pdf

BED consolidated: rinfo.boverket.se/BFS2007-4/dok/BFS2021-3_Konsolidering.pdf

Boverket primärenergital explainer: boverket.se/sv/byggande/bygg-och-renovera-energieffektivt/energihushallningskrav/

— Verified: 25 Aug 2026

Guidance and accreditation

Accreditation: SWEDAC (Styrelsen för ackreditering och teknisk kontroll) accredits the certification bodies, which then certify individual energy experts. Boverket validates foreign professionals' qualifications and provides the digital registration system.

Assessors must be certified to either N competence (simple buildings) or K competence (complex buildings, including most non-residential commercial stock).

SWEDAC: swedac.se

Boverket assessment calculation page: boverket.se/sv/energideklaration/for-energiexperter/berakning-av-byggnadens-energianvandning/

— Verified: 25 Aug 2026

Key inputs

The energideklaration records:

Normalisation for weather (normalårskorrigering) is performed using SMHI Energiindex (1991–2020 base period).

On-site generation — how wind turbines are treated

The measurement-based path

For existing buildings assessed via measurement (the standard path under BEN Chapter 3), on-site wind generation is captured automatically. An operational wind turbine that offsets purchased grid electricity reduces the building's measured delivered energy. That reduction flows into the normalised energy figure and hence into the primärenergital and energy class.

The effect is real and traceable. It does not require a specific wind-turbine carve-out in the calculation formula, because measurement-based assessment already incorporates the actual energy offset from on-site generation.

What BED and BEN say about wind

BED (BFS 2007:4, general advice) states explicitly: "Hantering av energi från sol, vind, mark, luft eller vatten regleras i Boverkets föreskrifter och allmänna råd (2016:12) om fastställande av byggnadens energianvändning vid normalt brukande och ett normalår." (The handling of energy from solar, wind, ground, air or water is regulated in BFS 2016:12.)

BEN (BFS 2016:12) Chapter 2 §5 (the calculation-method reduction clause) names solfångare (solar thermal collectors) and solceller (photovoltaic panels) explicitly. Wind turbines are not named separately in that specific clause. For existing buildings using the measurement-based path (Chapter 3), this distinction is not material — on-site wind generation reduces measured delivered energy directly, regardless of the §5 nominal formula.

Source: BEN BFS 2016:12 §5 primary text: rinfo.boverket.se/BFS2016-12/pdf/BFS2016-12.pdf; BED BFS 2007:4 general advice: boverket.se/sv/energideklaration/energideklaration/energideklarationens-innehall/ — Verified: 25 Aug 2026

Why electricity displacement matters more in Sweden

The primary energy weighting factor for electricity in Sweden (under BBR 2020 provisions) means each kWh of grid electricity displaced by on-site wind generation has a multiplied positive effect on the primärenergital, compared to displacing equivalent district heating energy. Buildings currently on direct electric heating or oil will benefit most.

Site-specific band improvement claims require a representative BEN calculation for the specific building and installation. [bc-w6x-sys-001 — Rune to initiate SBEM/BEN modelling]

Methodology changes under way — October 2026

Three confirmed changes are expected when Boverket publishes its BED (BFS 2007:4) and CEX (BFS 2007:5) prescription amendments, planned for 1 October 2026:

1. A0 class was added from 25 May 2026 — already in force.

2. BED and CEX prescription amendments implementing MEPS thresholds and remaining EPBD 2024 requirements — planned October 2026. The preliminary MEPS figures from October 2024 are not proposed policy and will be revised through this process.

3. Primärenergital (EPpet) vs Energiprestandatal (Etal): EPpet may be replaced by Etal in the updated BED prescriptions. A transition period will allow builders to choose between old and new rules. W65 to monitor Boverket's October 2026 publication.

Source: Boverket EPBD implementation page (primary); Sparbankernas Riksförbund remiss response, May 2026 — Verified: 25 Aug 2026

Understanding what this means for your building → Owner pathway

Verified: 25 Aug 2026

BEN §5 primary text retrieved from Boverket.